NZ Conveyor

Continuous Horizontal to Vertical Conveying

Nishimura Works' NZ Conveyor is a bucket conveyor that combines horizontal and vertical conveying in one machine.
Reducing the number of conveyors in your factory saves you money and space.

About the NZ Conveyor

Does your situation require horizontal conveyors followed by vertical conveyors when transporting loose material such as coal, ore, gravel, grain, and so on? The NZ Conveyor will eliminate the inefficiency of multiple conveyors and carry material continuously with one machine. It offers the following advantages:

About the NZ Conveyor

  • Horizontal and vertical conveying with one machine. Layout can be designed to meet your needs.
  • NZ Conveyor can be built with multiple feed openings.
  • With only one drive unit, you save on energy costs. Noise reduction is an added benefit
  • The upper section casing can be built with an open bottom.
  • Smooth movement at corners
Smooth Transfer from Horizontal to Vertical with the Bend Drum
  • The bend drum, which also acts as a collection mechanism, is the key to this bucket conveyor.
  • Material fed onto the belt is guided toward the center by the bend drum for feeding into the buckets.
  • Collection buckets fitted with scrapers, placed approximately every 10m, recover dust which falls into the bottom of the lower horizontal section, preventing accumulation above a certain level.

Smooth Transfer from Horizontal to Vertical with the Bend Drum

  • Bend drum
    Bend drum
  • Collection bucket with scraper
    Collection bucket with scraper

Specifications

Layout

Layout

Structural Diagram

Structural Diagram

Dimensions

Dimensions

Indicate length and height dimensions L1, L2 and V when inquiring

varies depending on the length of the conveyor. / ★ varies depending on the chute angle.

※You can check the table by scrolling left and right.

NZ-25 NZ-35 NZ-45 NZ-60 NZ-75 NZ-90
A 300 400 400 400 500 600
B 120 180 220 330 420 500
C 200 250 300 400 500 600
D 200 250 300 400 500 600
E 460 560 660 800 1,000 1,150
F 600 700 800 1,000 1,200 1,300
G 700 900 1,050 1,200 1,500 1,750
H 600 790 900 1,100 1,400 1,700

Subject to change without notice

Capacity

※You can check the table by scrolling left and right.

NZ-25 NZ-35 NZ-45 NZ-60 NZ-75 NZ-90
Capacity m³/h 6 12 21 42 65 90
Maximum piece size mm 25 35 45 60 90 120

Capacity is calculated at belt speed V=40m/min and a 70% bucket load.

Case Studies

Click here to learn more about NZ Conveyor applications.